JIANGYIN JACK-AIVA MACHINERY CO., LTD
JACK-AIVA Machinery CO,.LTD DUCTWORK MACHINERY MANUFACTURER
Add to Cart
C Channel Roll Former for production TDC flange Clamp
TDC flange Clamp Roll Former machine for the Manufacture of Air-condition Rectangular Ducts Fittings
The TDC flange clamp also named C Cleats is an popular product for the connection of air ducts, since they are easy to use, stable and offering a nice finish to the flange connection. The cleats fit all our flange series – 20 flange, 30 flange and 40 flange, .Wherever space is very limited during duct fitting, The C Channel are first choice for duct connection as less space is needed for assembly compared to G-clamps. C channel should be cut in lengths of 70-100mm and used in distances of not more than 300mm - ideally at a distance of not more than 200mm.
C Channel forming line Components
The Machine is consist of de-coiler, main forming machine, straightening part, cut-to length part (hydraulic control), run-out table, electrical control system, etc.
Main Parameters - C channel Roll Forming Machine For Rectangular duct flange
| ITEM | CONTENT |
| Raw material specification |
- Suitable material: GI steel material, DC51D+Z and without ZINC flower - Thickness: 1.25mm |
| Supplied from client | 1. drawing √ |
| 2. sample | |
| Forming Technology | De-coiling - cold roll forming --- cut to length -- Run out table |
| Single head De-coiler | Extending mode: manual control |
| Coil ID adjustable range: 360-520mm | |
| Max. capacity: 1000KG | |
| MAX. Coil OD: 1300mm | |
| MAX. Coil width: 300mm | |
| Main parameters | Roll forming stands: C PROFILE: 12 sets; |
| Flatting rolls quantity:2 pcs | |
| Side stands plate thickness: 20mm | |
| Roller material: Cr12Mov / SKII | |
| Rolls hardness after treatment: 60º-62º | |
| Bearing type: 6207 (HAERBIN) | |
| Rollers shaft material: 45# steel | |
| Roller diameter: Φ42mm | |
| Motor power: 3.7KW | |
| Gearing box type: JZQ250 | |
| Cooling system 1 set included | |
|
Max Forming speed: 1-10m/min (adjustable, VFD Control) |
|
| Hydraulic control cutting system | Shearing mode without scraps. |
| Cutter material: Cr12MoV | |
| Up moulds and downs moulds: 2 set | |
| Positioning mode: by length control sensor | |
| Run-out table | Length: 5000mm |
| According to client request! | |
| Electrical control system | 3XAC380V, 50HZ. |
|
Industry PC control, windows system. USB data input model. 2 emergency stop swithes installed, one at control box, another at entrance side. |
TDC flange clamp Installation
TAG: TDC flange clamp, TDC Flange clamp Roll Forming Machine, C channel Machine, Square Duct flange forming machine, Flanging machine, C cleat machine,